Cafonci Exterior Wall Transparent Waterproof Coating

 √  High/low temperature resistance

 √ Stable film formation

 √ Rapid efficiency

 √ Traffic and abrasion resistant

 √ High elongation rate

 √ Strong adhesion strength

 √ Exceptional  Flexibility

 √ Eco-Safe&Health-Conscious

 √ Extended Service Life

 √ Easy ApplicationApplication Range

Transparent Film Formation

Application does not compromise original wall surface decorative appearance, preventing yellowing and dust accumulation phenomena.

Suitable for waterproof sealing and repair of exterior wall surface water infiltration and fine crack defects on various building structures (excluding metal substrates and glazed surfaces)

Construction Methodssteps1.Construction environment must maintain dry, well-ventilated conditions; ready-to-use formulation (water addition strictly prohibited) with coverage of 5-7m² per liter;steps2.Construction temperature range: 5°C-35°C; avoid water contact for 6-12 hours following application;steps3.Fine Crack and Wall Tile Leakage Treatment: Apply initial coat longitudinally along crack direction (or tile joint direction), with additional material application at crack locations. After first coat drying, apply second coat in transverse direction. Three to four coat applications provide optimal waterproof performance.Precautions1. Maintain substrate cleanliness, ensuring dry conditions free from moisture, dust, and loose structural elements.2. Minimum two-coat application recommended with 90-degree cross-directional application pattern between coats. Pipe penetrations, floor drains, inside/outside corners, and expansion joints require reinforced treatment.3. Traffic and water exposure prohibited until coating is completely dry. Coating must be protected from sharp objects and deliberate damage. Bathrooms, water tanks, and similar areas require complete curing before conducting flood testing procedures.