English
简体中文
Products Description
Product name | Water Pool Waterproof Coating |
Color | Red, blue, gray |
Attribute | Waterproof Coating |
Scope ofapplication | pool, Swimming Pool, waterscape |
Certification | FranchA+,CELP,CCC |
Specification | 20KG/Bucke |
Coverage Rate | 1m²/kg |
Method | roller coating |
Shelf Life | 12 Months |
DryingTime | Tsurface Dry 4 hours Totally Dry 24 hours |
Origin | China |
Trademark | Cafonci |
Roofing Waterproof Coating
This product is a water-based environmentally friendly waterproofing material formulated from high molecular weight polymer emulsion, exhibiting flexibility, sealing properties, and penetration characteristics.
The emulsion forms a rubber-like elastic membrane upon curing, delivering superior weather resistance, abrasion resistance, and waterproof impermeability performance.
√ High/low temperature resistance
√ Stable film formation
√ Rapid efficiency
√ Traffic and abrasion resistant
√ High elongation rate
√ Strong adhesion strength
√ Exceptional Flexibility
√ Eco-Safe&Health-Conscious
√ Extended Service Life
√ Easy Application
√ Stable film formation
√ Rapid efficiency
√ Traffic and abrasion resistant
√ High elongation rate
√ Strong adhesion strength
√ Exceptional Flexibility
√ Eco-Safe&Health-Conscious
√ Extended Service Life
√ Easy Application
Application Range
Cafonci Rooftop Waterproof Coating offers extensive application versatility, covering building construction, infrastructure, and interior waterproofing sectors.
Construction Methods
steps1.
Clean substrate surface, apply primer coat first, thenapply this product; ready-to-use formulation suitable forroller application, brush application, or spray application,with coverage approximately 1m2/kg.
steps2.
During construction, treat corners, edges, and pipepenetration areas first,then proceed with large surface areaapplication; segmented construction may utilizeinterior/exterior wall corners as boundary demarcationlines.
steps3.
Theoretical drying interval time: minimum 4-hour dryingperiod required after application before applying secondcoat by spray, roller, or brush methods. Recommend 24-hour interval between first and second coat applications,following thin multi-coat application principle.Clean substrate surface; after applying primer or K11 basecoat, apply two coats ofthis product.
Precautions
1. Maintain substrate cleanliness, ensuring dry conditions free from moisture, dust, and loose structural elements.
2. Minimum two-coat application recommended with 90-degree cross-directional application pattern between coats. Pipe penetrations, floor drains, inside/outside corners, and expansion joints require reinforced treatment.
3. Traffic and water exposure prohibited until coating is completely dry. Coating must be protected from sharp objects and deliberate damage. Bathrooms, water tanks, and similar areas require complete curing before conducting flood testing procedures.
