English
简体中文
Products Description
Product name | Roof/Roofing Waterproof Coating |
Color | Red, blue, gray |
Attribute | Waterproof Coating |
Scope ofapplication | Roof, exteriorwall, and indoor waterproofing |
Certification | FranchA+,CELP,CCC |
Specification | 20KG/Bucke |
Coverage Rate | 1m²/kg |
Method | roller coating |
Shelf Life | 12 Months |
DryingTime | Tsurface Dry 4 hours Totally Dry 24 hours |
Origin | China |
Trademark | Cafonci |
Roofing Waterproof Coating
This product is a water-based environmentally friendly waterproofing material formulated from high molecular weight polymer emulsion, exhibiting flexibility, sealing properties, and penetration characteristics.
The emulsion forms a rubber-like elastic membrane upon curing, delivering superior weather resistance, abrasion resistance, and waterproof impermeability performance.
√ High/low temperature resistance
√ Stable film formation
√ Rapid efficiency
√ Traffic and abrasion resistant
√ High elongation rate
√ Strong adhesion strength
√ Exceptional Flexibility
√ Eco-Safe&Health-Conscious
√ Extended Service Life
√ Easy Application
√ Stable film formation
√ Rapid efficiency
√ Traffic and abrasion resistant
√ High elongation rate
√ Strong adhesion strength
√ Exceptional Flexibility
√ Eco-Safe&Health-Conscious
√ Extended Service Life
√ Easy Application
Application Range
Cafonci Rooftop Waterproof Coating offers extensive application versatility, covering building construction, infrastructure, and interior waterproofing sectors.
Construction Methods
steps1.Two-Coat Application:
Clean substrate surface; apply two coats of this product.
steps2.One Fabric Three-Coat System (Primer Base):
Clean substrate surface; apply one coat of primer, followed by one coat of this product, install reinforcement fabric, then apply two additional coats of this product.
steps3.One Fabric Three-Coat System (K11 Base):
Clean substrate surface; apply one coat of K11, followed by one coat of this product, install reinforcement fabric, then apply two additional coats of this product.
steps4.One Base Two-Coat System (Primer/K11 Base):
Clean substrate surface; after applying primer or K11 base coat, apply two coats of this product.
Precautions
1. Maintain substrate cleanliness, ensuring dry conditions free from moisture, dust, and loose structural elements.
2. Minimum two-coat application recommended with 90-degree cross-directional application pattern between coats. Pipe penetrations, floor drains, inside/outside corners, and expansion joints require reinforced treatment.
3. Traffic and water exposure prohibited until coating is completely dry. Coating must be protected from sharp objects and deliberate damage. Bathrooms, water tanks, and similar areas require complete curing before conducting flood testing procedures.
